PageGate Connectors for Modem or Internet
Connections Transcript for Video:
Welcome to the tutorial on how to configure the
Connectors in PageGate for internet and modem
or Internet only traffic.
The first step is to run the PageGate Admin,
so go to your start menu, go to Programs, find
the PageGate program group, and left click on
PageGate Admin.
Once in the admin, left click on the + next
to the Connectors section.
Then click on the + next to Connector 1 and left
click on Settings.
Here in the settings of connector 1, you'll see
the following fields.
To configure a connector to send modem and Internet
based traffic, we'll need to tell the program
what modem to use.
To do this, find the Serial Port field and left
click on the Drop Down arrow next to it
. The Serial Port MUST match the COM port of
the modem you want to use.
After selecting the serial port, look for the
Init String field.
By default, this should be set to (auto) so
that the program will automatically determine
the best initialization string to use with your
modem.
Below that, we have the Dialing Prefix.
If your phone line requires you to dial a prefix
before reaching an outside line, such as a 9,
enter it here.
By default, you want Dedicated Carrier set to
none.
Leave direct connect unchecked.
If you want to configure the connector for Internet
only traffic, which is to say, tell this connector
that it is never to try to use a modem or any
of the dialing protocols, set the Serial Port
to 0.
After setting your communications preferences,
left click on Apply.
This concludes the tutorial on how to configure
the Connectors in PageGate for Internet and modem
or Internet only traffic.
For more tutorials, including how to configure
the connectors for direct connections to a serial
terminal, please visit our website, www.notepage.net
- Video
RSS Feed
|