Variable
|
Possible Values
|
Description
|
BodyMaxChars
|
Numeric
|
Example: BodyMaxChars = 200
This parameter limits the length of the %Message% macro and does not override the carrier "Max Chars" setting.
|
Filter
|
File path to and file name of the filter to run
|
Note: pgfilter.exe and pgfilter.dll must reside in the PageGate program directory to use this parameter.
Example: Filter = c:\PageGateData\Filters\yourcarrierfilter.xml
This parameter calls on PageGate's filtering system when using this carrier.
|
FilterDebugFile
|
File path to and file name of the log to write
|
Example: FilterDebugFile = c:\PageGateData\Filters\outboundfilter1.log
When using a filter, you can use this variable to output this specific filter's log to the specific location and file name.
|
From
|
Text
|
Example: From = CAD
This variable overrides the value passed to PageGate by the input modules/APIs. By specifying this variable, you're telling PageGate to use a single, standardized sender's name for all traffic controlled by this template.
|
InterCommandDelay
|
Milliseconds
|
Example: InterCommandDelay = 500
This variable inserts a pause, in milliseconds, in between each command used in the protocol negotiation with the hardware. This is used to make sure PageGate doesn't send commands faster than the device's command shell can receive them and is not required for all devices.
|
InterMessageDelay
|
Milliseconds
|
Example: InterMessageDelay = 1000
This variable forces PageGate to delay for the specified number of milliseconds (1000 = 1 second) after delivering each message.
|
SNPPMessOnly
|
True
False
|
Example: SNPPMessOnly = True
This variable tells PageGate to use the MESS command, instead of the DATA command, during the SNPP delivery sequence.
|
StripAlpha
|
True
False
|
Example: StripAlpha = True
Setting this value to true will remove any alphabetical character from messages delivered through this carrier. For example, if you tried to send the message 'Alert on node 127.0.0.1', the only thing delivered would be '127.0.0.1'
|
StripCharacters
|
See description
|
Example: StripCharacters = |\~
This parameter will remove all instance of any character(s) entered. In the above example, that would strip out all pipes (|), backslashes (\) and tildes (~).
|
StripNonPrintable
|
True
False
|
Example: StripNonPrintable = True
Settings this value to true will remove any non-printable ASCII characters, like carriage returns, line feeds, horizontal tabs and similar, from messages delivered through this carrier.
|
To
|
Text
|
Example: To = 7818290500
This variable overrides the ID/PIN or Email values. By specifying this variable, you're telling PageGate to send all traffic processed by this template to the specified ID or Email address instead.
|
UseFilterDll
|
True
False
|
Note: pgfilter.exe and pgfilter.dll must reside in the PageGate program directory to use this parameter.
Example: UseFilterDll = True
Setting this parameter to true tells PageGate to use the filter dll, which is a more efficient method of running the filter.
|